Balboa BP7 Spa Control 4.0kW Flow Thru Heater A system built for the aftermarket This A With 7 relays, the BP7 has 32 different setups and can power a spa with 1-3 pumps, including Microsilk systems. Can also replace any Balboa BP System* while using the existing topside that is already installed on the spa. Will replace any Balboa or other brand’s non-low flow system* when you match it with any TP or SpaTouch topside panel. G6406 BP7 Programming And topside Configuration click HEREFeatures:Supports all TP and SpaTouch topsidesSupports all BP ancillary products (ControlMySpa, BBA, CZ, and Status Pro)Plug-N-Click HeaterWiFi Ready (Not included- accessory Wifi Unit 51159)Kit Includes:G4361 - Balboa BP7 System with 4.0kW Heater55676-09 - Balboa TP600 Panel, Less Overlay12762 - TP600 Panel Overlay (6-Button, Oval)25098 - Wire Assembly, 8ft for spa light15380 - Panel Bezel (Adapter Plate)REPLACEMENT NOTE: Gecko in.ye-5 is the best retrofit option. Can also use in.yj as replacement option - may be cheaper alternative. Please see below for substitute options.-CAN REPLACE ANY BP BALBOA SYSTEM* - While using the existing topside that is already installed on the spa.-CAN REPLACE ANY BALBOA VS OR EL SYSTEM* - When you match it with any TP or SpaTouch™ topside panel.*Both the Circ pump and Ozone can be converted to 120V, however, they will be the same voltage after conversion. (Both 120V or both 240V.)*If a 24-hour circulation pump is being installed, it must have no less than a 23 GPM flow. Laing, Grundfos, or Waterway Tiny Might pumps do not perform at this rate and cannot be used.
Additional Information System Voltage 230V Heater Type Flow Thru Heater Wattage 4.0kW Keypad Included Included Supports Pump1 + Pump2 + Blower/Pump3 Alternate Part Numbers VS300 VS500Z VS501Z VS501SZ VS503SZ VS504SZ VS510SZ VS510DZ VS511Z VS511SZ VS513Z VS514SZ VS515Z VS515SZ VS520Z VS520SZ VS520DZ VS525Z ››
|